 |  | 
New Page 1
2U PCI/PCI-E combo riser card.
1*PCIe x8 + 2*PCIX-64bit/3.3V w/7cm custom length flex cable.
The middle PCIe x8 riser connector linked with the goldfingers is connected to
the motherboard PCIe x8 slot-6.an completely indepedent PCI-Express connection.
The top PCIX-64 riser connector (full) linked with a custom flex cable is
connected to the nearby motherboard PCIX-64 slot, another completely independent
PCI-X connection.
The bottom PCIX-64 riser connector (share) linked w/a 8-wires paddle link is
connected to the next PCIX-64 slot. Connectors w/flex cable and 8-wires paddle
link must be connected to the same PCIX buses 66MHz/100MHz. For one slot 133MHz
expansion the PCIX-64 connector linked w/flex cable is connected to the
motherboard PCIX 133MHz slot and the 8-wires paddle link is disconnected from
the riser card.
For expansion of PCIe x8 on motherboard slot-6 and 2*PCIX-64 connection on
nearby slots(same PCI-X buses 66MHz/100MHz) such as Supermicro X6DHE-G2, X6DH8-G
X6DH8, X6DHE, X6DH3,
X6DHT Series, Tyan S3992-E, etc.
|
| |
|
