 |  | 
ELECTRICAL SPECIFICATIONS
Input range: 90-264VAC autorang , single phase
Frequency: 47-63Hz
Input current: 7A max. @115VAC, 3.5A max. @230VAC, full load
Inrush current; not exceed 60 amps peak at 100 vrms input voltage, measured at
cold start
Efficiency: 63% min, at low line 110/220 VAC full load
EMI/EMC: FCC Part 15J Class B, CISPR22/EMC directive 89/336
Maximum power: 300 W Max
Hold-up time: 16ms min, at maximum o-p (300w) 100v, 50Hz
O/P rise time: less than 100 ms (10% ~ 90% of 0/p Voltage)
Short circuit protection: all outputs short to ground should not damage the
power supply
Over current protection: Single power supply operation
Leakage current: 0.75mA at 100 Vac/60Hz
Power good: the unit has an active high TTL compatible signal capable of
Sinking 5mA and sourcing 200 uA. This signal becomes active within 100
~ 500 ms from +5V output reaching steady state. It become inactive at least 1 ms
before +5V drop below 4.75V
Operation temperature: 5-40 ˚C
Storage temperature: -20-60˚C
Humidity: 5-95% RH
|
|