 |  | 
Sparkle Power 2U 650w Power Supply
Model # FSP650-802U
Specification
- Temperature Range:
Operating 0˚C ~ +50˚C on full load; storage & shipping -40˚C ~ +70˚C
- Humidity: 95% on
operating and 95% on storage
- Dielectric Withstand:
Input to frame ground 1800V AC for 1 second
- Efficiency: 70% at
minimum measured at 115V AC and with maximum load on all output
- Rise Time: +5V DC: 70ms
maximum
- Hold-up Time: 20ms
minimum at nominal input voltage
- Power Good Signal: Power
on delay time 200 ms to 1000 ms, off delay 1ms minimum (TTL and CMOS
compatible)
- Leakage Current: Not
exceed 3.5mA at 264VAC/60Hz
- MTBF: 100,000 hours on
maximum load at +25˚C degree
- Dimension (W x H x L):
106 x 82.2 x 300mm/4.17" x
3.24" x 11.81" inches
Input
Characteristics:
- Input Range: 95~265V AC,
Full Input Range
- Frequency: 47~63Hz
- Input Current:
8A(RMS)@115AC, 4A(RMS)@230V AC
- Inrush Current: 50A Max
for 115V AC and 50A Max for 230V AC AC Cold Start
Output Characteristics
|
Output Voltage |
Minimum Load |
Maximum Load |
Load Reg. |
Line Reg. |
Ripple & Noise |
|
+3.3V |
0.5A |
30A |
+-5% |
+-1% |
50mV P-P |
|
+5V |
0.5A |
30A |
+-% |
+-1% |
50mV P-P |
|
+12V1 |
0.3A |
12.5A |
+-5% |
+-1% |
120mV P-P |
|
+12V2 |
0.3A |
12.5A |
+-5% |
+-1% |
120mV P-P |
|
+12V3 |
0.5A |
14.0A |
+-5% |
+-% |
120mV P-P |
|
+12V4 |
0.3A |
8A |
+-5% |
+-1% |
120mV P-P |
|
-5V |
0.0A |
0.3A |
+-10% |
+-1% |
120mV P-P |
|
-12V |
0.0A |
0.8A |
+9%/-5% |
+-1% |
120mV P-P |
|
+5Vsb |
0.0A |
2.0 A |
+-5% |
+-% |
50mV P-P |
|
|