Dynapower 1U 300W 80Plus Switching Power Supply, Model # TC-1U30P80

AC Input:

• Output over voltage protection
• Short circuit protection on all output
• 100% burn-in under high ambient temperature
• The power supply shall withstand the following ESD conditions at any point on the power supply
• 100% Hi-pot tested
• Line input fuse protection
• With 4cm fan

DC Output:

+3.3V &+5V total output not exceed 110W
The continuous total output power is 300W max.

• Dimension : 190 mm x100 mm x40 mm
• Application : For IPC
• Watt : 300
• PFC : Active
• Voltage : 90 to 264 VAC
• Frequency : 47Hz to 63Hz
• Input Current : 115Vac / 6.3A max. 230Vac / 3A max.
• Inrush Current : No damage shall occur to the power supply and the fuse shall not open or exceed its maximum rating: 100A max @ 230Vac 25˚C cold start.
• Remote ON/OFF Control : TTL High/PS-OFF; TTL Low/PS-ON
•  VIL=0.8Vmax, IIL=-1.6mAmax @Vin=0.4V
•  VIH=2.0Vmin @Iin=-200uA, VIH=5.25Vmax @open ckt
• Operating Temperature : 0˚C to +50˚C
• Storage Temperature : -20˚C to +60˚C
• OPERATING HUMIDITY 10% to 90%,non-condensing at 40˚C
• STORAGE HUMIDITY 5% to 95%, non-condensing at 50˚C
• Hold-up Time : 16 msec (minimum) at 80% of full load at 115Vac input.
• Power Efficiency :80% (min.) at 20%,50%,100% loading line input
• MTBFat 25˚C(demonstrated) :100kHrs Minimum at full load.