Home | Power Supplies| 80 Plus| 2U| Dynapower 80 Plus 2U 400W Switching Power Supply Model # TC-2U40P80

Dynapower 80 Plus 2U 400W Switching Power Supply Model # TC-2U40P80

My Pc Case
Dynapower 80 Plus 2U 400W Switching Power Supply Model # TC-2U40P80
My Pc Case

Item#:

TC-2U40P80

Price:

$119.99

Sale Price:

$99.00
(You Save $20.99 )
Quantity:
My Pc Case
Bookmark and Share
My Pc Case
My Pc Case

80 PLUS Verification and Testing Report

INPUT SPECIFICATIONS
Input voltage: 90 to 264 VAC
Input frequency: 47 to 63 Hz

PROTECTIONS
Over voltage protection: +3.3V: 3.5V - 4.8V; +5V: 5.5V - 6.82V; +12V: 13.4V - 15.6V
Short circuit protection: It is defined to be a short circuit load of less than 0.1 ohm

GENERAL SPECIFICATIONS
Hold-up time: >17ms
Efficiency: >80% at full load.
Voltage: 1500VAC from input to output
MTBF: 100,000 hours at full load at 25˚C

ENVIRONMENTAL SPECIFICATIONS
Operating temperature
: 0˚C to +50˚C
Storage temperature: -20˚C to +80˚C
Relative humidity: 95% non-condensing

DC Output:



 



OUTPUT VOLTAGE OUTPUT CURRENT REGULATION OUTPUT
MIN ( A ) MIN ( A ) LOAD LINE RIPPLE & NOISE
MAX. [P-P]
+5V 0.5 20 ±5% ±1% 50mV
+12V1 1.5 16 ±5% ±1% 120mV
+12V2 1.5 16 ±5% ±1% 120mV
-12V 0 0.5 ±10% ±1% 120mV
+3.3V 0.5 20 ±5% ±1% 50mV
+5VSB 0 2.5 ±5% ±1% 50mV


(1) The +3.3V and +5V total output shall not exceed 150watts.
(2) total output for this subject power supply is 400 watts.
(3) Ripply and noise measurements shall be made under all specified load conditions through a single pole low pass filter with 20MHz cutoff frequency. Outputs shall bypassed at the connector with a 0.1uF ceramic disk capacitor and a 10uF electrolytic capacitor to simulate system loading.
(4) -5V is option.

Feautres



  • Dimension : 240 X 100 X 70mm
  • Application : For Industry Use
  • Watt : 400
  • PFC : Active
  • 80 PLUS
  • High efficiency
  • Low Ripple & Noise
  • 100% burn-in under high ambient temperature(50˚C)
  • 100% Hi-pot tested
  • Complies with EN61000-3-2
  • AC input full range
My Pc Case