Sparkle Power 270W Flex ATX Switching Power Supply, 80 Plus, Model # SPI270LE

Features
> Complied with Flex ATX and ATX12V standard
> Active Power Factor Correction (PFC) meet EN61000-3-2
> High efficiency and reliability
> Compatible with European Union Directive 2002/95/EC (Restriction on Hazardous Substances).
> Remote ON/OFF function
> Internal 12V DC fan included
> Noise Killer (thermal fan speed control function)
> Low noise and ripple
> Output over voltage, short circuit, and over current protection
> 100% Hi-pot, ATE, and burn-in tested
> Re-settable power shut down
> Complies with FCC part 15 subpart J class B 115Vac operation, and CISPR 22 class B at 230Vac operation
> Approved by CUL/UL60950-1, TUV EN60950-1, NEMKO EN60950-1 (CB Report) CE ,BSMI ,FCC

Input Characteristics
> Input Range: 90 ~ 264Vac, Full Range Input
> Frequency: 47 ~ 63Hz
> Input Current: Max 5A @ 115Vac, 3A @ 230Vac
> Inrush Current: No damage.

Output Characteristics Specification
> Temperature Range: Operating: 0˚C ~ +50˚C on full load; storage & shipping: -20˚C ~ +80˚C
> Humidity: 5~90% on operating,5~ 95% on storage 
> Dielectric Withstand: Primary frame ground 1800V AC for 1 second
> Efficiency: 80% minimum
> Rise time: Less than 20ms
> Hold-up Time: 17ms minimum at nominal input voltage
> Power Good Signal: Power on delay time 100 ~ 500ms, off delay 1ms minimum (TTL and CMOS compatible)
> Leakage Current: Less than 3.5mA at 264Vac, 50Hz
> MTBF: 100,000 hours on maximum load at +25˚C
> Dimensions (LxWxH): 150x81.5x40.5mm /6x3.2x1.6inch

Output Voltage	Minimum Load	Normal Load	Maximum Load	Load Reg.	Ripple & Noise
+3.3V	0.5A	8A	16A	+ - 5%	50mV P-P
+5V	0.5A	9A	18A	+ -  5%	50mV P-P
+12V1	1.0A	8A	16A	+ -  5%	120mV P-P
+12V2	1.0A	5A	10A	+ -  5%	100mV P-P
-12V	0.0A	0.4A	0.8A	+ - 10%	120mV P-P
+5Vsb	0.0A	1.25A	2.5A	+ -  5%	50mV P-P

* +12V1 and +12V2 total output shall not exceed 18 A.
* +3.3V and +5V total output not exceed 130W
* Total output for this subject power supply is 270W