Sparkle Power SFX12V 300W 80Plus Micro ATX Switching Power Supply, Model # SPI300GLS

Features
Complied with SFX 12V standard
Active Power Factor Correction (PFC) meet EN61000-3-2
High efficiency and reliability
Compatible with European Union Directive 2002/95/EC (Restriction on Hazardous Substances).
Remote ON/OFF function
Internal 12V DC fan included
Noise Killer (thermal fan speed control function)
Low noise and ripple
Output over voltage, short circuit, and over current protection
100% Hi-pot, ATE, and burn-in tested
Re-settable power shut down
Complies with FCC part 15 subpart J class B 115Vac operation, and CISPR 22 class B at 230Vac operation
Approved by CUL/UL60950-1, CSA C22.2 NO. 60950-1, TUV EN60950-1, NEMKO EN60950 (CB Report) FCC EMC 

Input Characteristics
Input Range: 90 ~ 265Vac , Full Range Input
Frequency: 47 ~ 63Hz
Input Current: Max 4A @ 115Vac, 2A @ 230Vac
Inrush Current: No damage

Specification
Temperature Range: Operating: 0˚C ~ +50˚C ; storage & shipping: -20˚C ~ +80˚C
Humidity: 5 ~ 95% on operating, 5 ~ 95% on storage
Dielectric Withstand: Primary frame ground 1800V AC for1 second
Efficiency: 80% minimum, 84.3% on Typical Load
 Rise time: Less than 20ms
Hold-up Time: 17ms minimum at nominal input voltage
Power Good Signal:Power on delay time 100 ~ 500ms, off delay 1ms minimum (TTL and CMOS compatible)
Leakage Current: Less than 3.5mA
MTBF: 100,000 hours on maximum load at +25˚C
Dimensions (LxWxH): 100x125x63.5mm / 4x4.9x2.5inch

Output Voltage	Minimum Load	Normal Load	Maximum Load	Peak Load	Load Reg.	Ripple & Noise
+3.3V	0.5A	10A	20A		+ - 5%	50mV P-P
+5V	0.3A	11A	22A		+ - 5%	50mV P-P
+12V1	1.0A	8A	16A		+ - 5%	120mV P-P
+12V2	1.0A	8A	16A	19A	+ - 5%	120mV P-P
-12V	0.0A	0.25A	0.5A		+ - 10%	120mV P-P
+5Vsb	0.0A	1.0A	2.0A	2.5A	+ - 5%	50mV P-P

+3.3V and +5V total output not exceed 125W
Total output for this subject power supply is300W