Sparkle Power ATX12V PS/2 400W 80Plus Switching Power Supply, Model # SPI400PFB

Features
Complied with ATX12V standard
Active Power Factor Correction (PFC) meet EN61000-3-2
High efficiency and reliability
Compatible with European Union Directive 2002/95/EC (Restriction on Hazardous Substances).
Remote ON/OFF function
Internal 12V DC fan included
Noise Killer (thermal fan speed control function)
Low noise and ripple
Output over voltage, short circuit, and over current protection
100% Hi-pot, ATE, and burn-in tested
Re-settable power shut down
Complies with FCC part 15 subpart J class B 115Vac operation, and CISPR 22 class B at 230Vac operation
Approved by CUL/UL60950-1, CSA, TUV EN60950-1, CB report (60950-1),BSMI,FCC,EMC  

Input Characteristics
Input Range: 90 ~ 264Vac (RMS), Full Range Input
Frequency: 47 ~ 63Hz
Input Current: Max 6A (RMS) @ 115Vac, 3A (RMS) @ 230Vac
Inrush Current: No damage

Specification
Temperature Range: Operating: 0˚C ~ +50˚C ; storage & shipping: -20˚C ~ +80˚C
Humidity: 85% on operating,95% on storage
Dielectric Withstand: Primary frame ground 1800V AC for 1 second
Efficiency: 80% minimum, typical up to 87%
Rise time: Less than 20ms
Hold-up Time: 17ms minimum at nominal input voltage
Power Good Signal: Power on delay time 100 ~ 500ms, off delay 1ms minimum (TTL and CMOS compatible)
Leakage Current: Less than 3.5mA at 264Vac, 50Hz
MTBF: 100,000 hours on maximum load at +25˚C
Dimensions (LxWxH): 140x150x86mm / 5.5x5.9x3.4inch

Output Voltage	Minimum Load	Normal Load	Maximum Load	Load Reg.	Line Reg.	Ripple & Noise
+3.3V	0.3A	10A	20A	+ - 5%	+ - 1%	50mV P-P
+5V	0.5A	10A	20A	+ - 5%	+ - 1%	50mV P-P
+12V1	1.0A	8A	16A	+ - 5%	+ - 1%	120mV P-P
+12V2	1.0A	8A	16A	+ - 5%	+ - 1%	120mV P-P
-12V	0.0A	0.25A	0.5A	+ - 5%	+ - 10%	120mV P-P
+5Vsb	0.0A	1.25A	2.5A	+ - 5%	+ - 5%	50mV P-P

+3.3V and +5V total output not exceed 150W
Total output for this subject power supply is 400W