Home | Power Supplies| 2U Single| Sparkle Power 2U 500W ATX12V/ EPS12V 80Plus Switching Power Supply, Model # SPI5002UC

Sparkle Power 2U 500W ATX12V/ EPS12V 80Plus Switching Power Supply, Model # SPI5002UC

My Pc Case
Sparkle Power 2U 500W ATX12V/ EPS12V 80Plus Switching Power Supply, Model # SPI5002UC
My Pc Case

Item#:

SPI5002UC

Price:

$98.00

Sale Price:

$89.99
(You Save $8.01 )
Quantity:
My Pc Case
Bookmark and Share
My Pc Case
My Pc Case

Features
Complied with ATX12V/ EPS12V standard
Active Power Factor Correction (PFC) meet EN61000-3-2
High efficiency and reliability
Compatible with European Union Directive 2002/95/EC (Restriction on Hazardous Substances).
Remote ON/OFF function
Internal 12V DC fan included
Low noise and ripple
Output over voltage, short circuit, and over current protection
100% Hi-pot, ATE, and burn-in tested
Re-settable power shut down
Complies with FCC part 15 subpart J class B 115Vac operation, and CISPR 22 class B at 230Vac operation
Approved by : UL,CSA22.2 NO or CUL 60950-1, TUV or VDE, EMC,FCC ,CE, CB report.

Input Characteristics
Input Range: 90 ~ 264Vac, Full Range Input
Frequency: 47 ~ 63Hz
Input Current: Max 10A @ 115Vac, 5.0A @ 230Vac
Inrush Current: No Damage

Iutput Characteristics Specification
Temperature Range: Operating: 0C ~ +50C on full load; storage & shipping: -20C ~ +80C
Humidity: 85% on operating, 95% on storage
Dielectric Withstand: Primary frame ground 1800V AC for 1 second
Efficiency: Typical up to 85%
Rise time: Less than 20ms
Hold-up Time: 16 ms minimum at nominal input voltage
Power Good Signal: Power on delay time 100 ~ 500ms, off delay 1ms minimum (TTL and CMOS compatible)
Leakage Current: Less than 3.5mA at 264Vac, 50Hz
MTBF: 100,000 hours on maximum load at +25C
Dimensions (LxWxH): 240x100x70mm /9.4x3.9x 2.7 inch

Output Voltage Minimum Load Normal Load Maximum Load Load Reg. Ripple & Noise
+3.3V 0.5A 12A 24A + - 5% 50mV P-P
+5V 0.5A 10A 20A + - 5% 50mV P-P
+12V1 1.0A 7.5A 15A + - 5% 120mV P-P
+12V2 1.0A 7.5A 15A + - 5% 120mV P-P
+12V3 1.0A 7.5A 15A + - 5% 120mV P-P
-12V 0.0A 0.25A 0.5A + - 10% 120mV P-P
+5Vsb 0.0A 1.25A 2.5A + - 5% 50mV P-P

*+3.3V and +5V total output not exceed 150W
* +12V1 and +12V2 , +12V3 total output not exceed 35A
* Total output for this subject power supply is 500W

My Pc Case