Sparkle Power PS2 600W ATX12V Switching Power Supply, Model#SPI600A8BB-B204

Features
* Complied with ATX12V standard
* Active power factor correction (PFC) meet EN61000-3-2
* High efficiency and reliability
* Compatible with European Union Directive 2002/95/EC (Restriction on Hazardous Substances)
* Remote ON/OFF function
* Internal 12V DC fan included
* Noise Killer (thermal fan speed control function)
* Low noise and ripple
* Output over voltage, short circuit, and over current protection
* 100% Hi-pot, ATE, and burn-in tested
* Re-settable power shut down
* Complies with FCC part 15 subpart J class B 115Vac operation, and CISPR 22 class B at 230Vac operation
* Approved by CUL/UL60950-1 2nd TUV EN60950-1 2nd, CB 60950-1 2nd report, FCC, EMC

Input Characteristics
Input Range: 90 ~ 265Vac (RMS), Full Range Input
Frequency: 47 ~ 63Hz
Input Current: Max 12A (RMS) @ 115Vac, 6A (RMS) @ 230Vac
Inrush Current: No damage

Output Characteristics

Output Voltage Min Load Normal Load Max Load Load Reg. Ripple & Noise
+3.3V 1.5A 12A 25A

±5%

50mV P-P
+5V 1.0A 15A 25A

±5%

50mV P-P
+12V1 1.0A 8A 16A

±5%

120mV P-P
+12V2 1.0A 8A 16A

±5%

120mV P-P
+12V3 1.0A 8A 16A

±5%

120mV P-P
+12V4 0.5A 8A 16A

±5%

120mV P-P
-12V 0.0A 0.25A 0.5A

±10%

120mV P-P
+5Vsb 0.0A 2.0A 4.0A

±5%

50mV P-P

* +3.3V and +5V total output not exceed 123W
* Maximum combined current for the +12V outputs shall be 36A
* +12V2 Peak current is 19A (less than 10m Sec.), minimum voltage during peak is >11.0Vdc.
*+5VsbPeakcurrentis 3.5A(lessthan500mSec.) , minimumvoltageduringpeakis>4.5Vdc.